OPERATION
HEAD LAMPS-TURN SIGNALS-DIMMER SWITCH
Head Lamps Switch
Switch (6) is used to light up the front head lamps, side clearance
lamps, tail lamps, and instrument panel.
Position (a): OFF (Lamps go out)
Position (b): Side clearance lamps, tail lamps, and instrument panel
light up
Position (c): Head lamps light up in addition to lamps at (position
Turn Signals Switch
Switch (6) is used to operate the turn signal lamp.
(a) position: LEFT TURN (Push lever forward.)
(b) position: OFF
(c) position: RIGHT TURN (Pull lever back.)
When the steering wheel is turned back, the lever automatically
returns to its original position. If it does not return, return it manually.
Dimmer Switch
Switch (6) is used to switch the head lamps between high beam and
low beam.
Position (a): LOW BEAM
Position (b): HIGH BEAM
HORN BUTTON
When the horn button (7) in the center of the steering wheel is
pressed, the horn will sound.
WA320PT-5L
2-25