Install The Seat - Kohler REACH COMPACT K-29216T-NS Installation Instructions Manual

INSTALL THE SEAT

(For K-29216T-NS)
Install the toilet seat according to the
seat manufacturer's installation
instructions.
INSTALL THE SEAT
(For K-29216T-HC)
Install the toilet seat according to the
seat manufacturer's installation
instructions.
The plug / power cord / water pipe of
the smart cover plate passes through
the large hole on the upper surface of
the toilet, See Fig.#16 .
The power cord and the water pipe are
then clamped into the hook on the
back of the toilet as shown in figure 16.
Connect the water pipe and power.
FILL FLOAT WITH
BALLAST
Test flush the toilet.
Periodically check all connections for
leaks for several days following
installation.
Set the tank cover in place on the tank.
MINOR ADJUSTMENT OF WATER LEVEL
Move the snap along "OPEN" direction.
To lower water level: Move water cup down to a proper
height and rotate screw anticlockwise to achieve the desired
water level. (Refer to float adjustment instructions.)
1505361-T2-A
Hook
Snap
SCALE
5:1
Fig.#18a
18 a
Fig.#15
15
Fig.#16
16
Fig.#17
17
OPEN
-6-
-6-
( K-29216T-NS)
( K-29216T-HC)
/ /
16
Screw
Fig.# 18 b
18 b
16