Sks_Ssi; 3.6.10. Sks_Tlci - Sekonic C-7000 SDK Reference Manual

C-7000 SDK REFERENCE MANUAL
3.6.9.

SKS_SSI

(Available in C-7000 SDK V2.00 or higher)
SK_GetMeasuringResult () to get the measurement result of SSI
Measurement result is preserved as character string. It shows the following values in the
table below.
FW Version
V24 or lower
V25 or higher
*1 Reference light source cannot be selected from C-7000 SDK. Select it on the screen of
SSI mode in C-7000 meter.
SKS_TM30
variable
SSIt
SSId
SSI1
SSI2

3.6.10. SKS_TLCI

(Available in C-7000 SDK V2.00 or higher)
SK_GetMeasuringResult () to get the measurement result of TLCI-2012/TLMF-2013.
Measurement result is preserved as character string. It shows the following values in the
table below.
FW Version
V24 or lower
V25 or higher
*1 Reference light source cannot be selected from C-7000 SDK. Select it on the screen of
TLCI/TLMF mode in C-7000 meter.
SKS_TLCI
variable
TLCI
TLMF
Conditions
No Reference
Within measuring
range
Lower than
measurement spec
Higher than
measurement spec
type
String
String
String
String
Conditions
No Reference
Within measuring
range
Lower than
measurement spec
Higher than
measurement spec
type
String
String
SSIt, SSId
"N/A"
Measured value Measured value
"Under"
"Over"
explanation
SSI Tungsten
SSI Daylight
SSI Reference light source 1
SSI Reference light source 2
TLCI
"N/A"
Measured value Measured value
"Under"
"Over"
explanation
TLCI-2012
TLMF-2013
No. I401-C-700-034
SSI1, SSI2
"N/A"
"---"(*1)
"Under"
"Over"
TLMF
"N/A"
"---"(*1)
"Under"
"Over"
Page 12
2012/03/01