Sks_Meas_Result - Sekonic C-7000 SDK Reference Manual

C-7000 SDK REFERENCE MANUAL

3.6.14. SKS_MEAS_RESULT

SK_GetMeasuringResult ()to get measurement value result
SK_MEAS_RESULT
variable
ResultFlag
Tristimulus
CIE1931
CIE1976
ColorTemperature
ColorRenditionIndexes
TM30
SSI
TLCI
Illuminance
DWL
PPFD
PeakWavelength
SpectralData_1nm()
SpectralData_5nm()
*1 Available in C-7000 SDK V2.00 or higher. C-7000 meter FW should be ver. 25 or
higher to get the measured value.
*2 Measurement result is preserved as character string. It shows "Under" in case
result is lower than measurement spec, and it shows "Over" in case the result is
higher than measurement spec.
type
SKF_RESULT_VALUE
SKS_TRISTIMULUS_VALUE
SKS_CIE1931
SKS_CIE1976
SKS_COLOR_TEMPERATURE
SKS_COLOR_RENDERING_INDEX
SKS_TM30
SKS_SSI
SKS_TLCI
SKS_ILLUMINANCE
SKS_DOMINANT_WAVELENGTH
String
String
Single
Single
No. I401-C-700-034
explanation
Result flag NONE/ON
(refer3.5.11)
Tristimulus value
(refer3.6.2)
CIE1931(CIE1964) Chromaticity
coordinates
(refer3.6.3)
CIE1976 Chromaticity
coordinates
(refer3.6.4)
Correlated Color Temperature
(refer3.6.5)
Color Rendering Index
(refer3.6.6)
TM-30-18(*1)
(refer3.6.8)
SSI(*1)
(refer3.6.9)
TLCI-2012/TLMF-2013(*1)
(refer3.6.10)
Illuminance /Luminous exposure
(refer3.6.11)
Dominant wavelength
(complementary wavelength)
(refer3.6.12)
Photosynthetic photon
flux density (*2)
Peak wavelength (*2)
1nm spectral data
5nm spectral data
Page 14
2012/03/01