Bluetooth Setting Options; Setting Viewing Options - Pandigital PAN7001W User Manual

2. Use the Arrow Buttons to highlight the photo you want to delete.
3. Press the SELECT button on the highlighted photo.
4. Press the DELETE SEL button to delete selected photos, or press the
DELETE ALL button to delete all photos in built-in memory. Once the
deletion is complete, a "FinishedF message display in the middle of the
screen.
Bluetooth@ Setting Options
Bluetooth USB Dongle Required. USB Btuetooth Dongle Support connectivity
to popular mobile phones; e.g.: BlackBerry, Motorola, Nokia, SonyEricssson and
others. Note: Models may vary; please ensure the phone supports
transmitting Photo to devices like DPF.
Step 1: Setting up your Bluetooth Personal Area Network (PAN) after
insert USB Bluetooth Dongle into the DPF.
a. Insert to the USB host port and then turn on the DPF. Please check
Pandigital's website for the comparable USB Bluetooth adapters.
http://www.pandiqital.net
b. From Home screen, you can see the Bluetooth_ icon appears on the
upper right hand corner.
Step 2: Ensure the connectivity is established before sending photos to
DPF.
a,
Search and Select the "Available Device" to connect from the list.
You should see "Pandigital" appears in the list. Authentication Code
is "1234" default value. Select "Pandigital" and continue transmitting
photo to DPF.
Note: the actual procedure of sending photo to your DPF may vary.
Please refer to your mobile device user guide manual for details.
b. When you transmitting selected photo to Pandigital DPF, you shell
see "Photo Transmitting" dialog appear in the middle of your DPF
screen.
c. When copy photo completes, your DPF will play the copied photo
immediately after.
Setting Viewing Options
You can control all of the viewing options in the Setup Menu using the
remote control. You can display the on-screen Setup Menu at any time by
19±