Configuring The Device - Siemens SIMATIC NET RUGGEDCOM RS900GP Installation Manual

Device Management
3.2 Configuring the Device
a
Connected internally.
b
Connected internally.
Communication Ports
Connect any of the available Ethernet ports on the device to a management
switch and access the RUGGEDCOM RS900GP console and Web interfaces via the
device's IP address. The factory default IP address for the RUGGEDCOM RS900GP is
https://192.168.0.1.
For more information about available ports, refer to
Ports" (Page
3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM RS900GP interface. For
more information about configuring the device, refer to the "RUGGEDCOM RS900GP
User Guide" associated with the installed software release.
16
17).
Pin Name
9 Reserved (Do Not Connect)
"Communication
Installation Manual, 11/2022, C79000-G8976-1026-09
Description
RUGGEDCOM RS900GP