How To Clean - Panasonic SR-TMB10 Operating Instructions Manual

o Be sure to unplug and carry out these operations
when the unit is cooled down.
o DO NOT use objects such as benzine, thinner,
cleansing powder or metal scrubbers.
Remove and clean after every use.
How to remove and clean
1. Pulf off the steam capto
/
jro
remove as shown
^ /d\, l-
-
in the figure
"@--
N:
r E l
2. Remove the valve holder from right
to left. Wash and wipe with a damP
3. Wipe the inside of the hole with
a damp cloth.
rz\
@
vffi:i.:il"r@
\
27fl
How to fit steam cap.
1. Insert the valve holder into the
steam cap by setting the tap of
the holder 6 into the slot of the cap
@and turn it from left to right until it
2. Put the steam cap into the hole
of the lid.
How to fit steam dome
(ln case it is accidentally taken off)
Place steam dome into its holder
by inserting steam dome tap @ into
slot @ (Steam dome mark @ and
steam cap mark @ must be in the
same line)then press
steam dome into
steam cap until
it seats properly.
o9:
(You will hear the sound " Click ")
cloth.
DO NOT remove.
Wipe with a damp cloth.
o DO NOT use a dishwashing
detergent.
Wash with a dishwashing
detergent and sponge and wipe
off any moisture outside.
lf an object has become stuck to the sensor, lightly polish it
off using fine sandpaper ( of about # 600 ) / steel wool.
Then wipe with a damp cloth.
4
Rice Scoop
Wash with a dishwashing detergent and sponge.
- 1 9 -