Table of Contents
Advertisement
5. Remove hardware securing gearbox
mounts to front pulley guard. Retain
hardware for reinstallation. See
Figure 36.
1
1. Gearbox Mounts
2. Front Pulley Guard
Figure 36
6. Remove three hex nuts and bolts
retaining gearbox mounts to deck
brackets. Retain hardware for
reinstallation. See Figure 37.
1
1. Gearbox Mounts
Figure 37
7. Lift gearbox assembly to release mower
drive belt. See Figure 38.
2
1
1
EN - 24
Figure 38
8. Remove mower drive belt.
Install Mower Drive Belt
See Figure 39.
Install belt in the following order:
1. Around front split pulley
2. Around left split pulley
3. Around right split pulley
NOTICE: Route belt according to the decal
located on the bottom of the floor pan.
3
1
1. Front Split Pulley
2. Left Split Pulley
3. Right Split Pulley
Figure 39
2
Advertisement
Table of Contents
