Gravely 885914 Operator's Manual page 21

Lubrication Points
• Apply grease to caster wheel pivot
bushings on both sides of mower deck.
See Figure 23.
Figure 23
• Apply grease to spindle bearings until
grease is expelled from vent on spindle
housings. See Figure 24.
Figure 24
• Apply grease to idler arm pivot joint. See
Figure 25.
• Apply grease to the two u-joints on the
drive shaft located below the mower deck
shield. See Figure 26.
General Lubrication
1. Lubricate all pivot points and pin
connections.
EN - 19
Figure 25
Figure 26