Account Code Entry - Panasonic KX-TA624 User Manual

3.2 Telephone Features

Account Code Entry

An account code is used to identify outside calls for accounting and billing purposes. The
account code is appended to the "Station Message Detail Recording (SMDR)" call
record. For incoming outside calls, account codes are not required. For outgoing outside
calls, account codes are often required. You can enter account codes in the following four
modes.
Verify - All mode: You must always enter a pre-assigned account code.
Verify - Toll mode: You can enter a pre-assigned account code so that you can override
Option mode: An account code can be entered when a record of the account code is
Forced mode: You must always enter an account code. It can be any number.
Making calls with account codes except in the Option mode
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.
Dial tone 3
Making calls with account codes in the Option mode and receiving calls
PT
During a conversation or while hearing a reorder tone after the other party hangs up
(within 30 seconds)
Press FWD/DND.
• You can keep talking.
toll restriction.
required. It can be any number.
CO
line access code
Press CO or
enter a line access code
(9 or 81 through 86).
account code
Enter an account
code (4 digits).
FWD/DND
Enter an account code (4 digits).
FWD/DND
4
For a PT: Press FWD/DND or PAUSE.
For an SLT: Dial 49 or
phone no.
Enter the phone number.
Dial tone
account code
PAUSE
or
For a PT
9
or
For an SLT
.
Telephone Features
A
3-7