Intercom Calling - Panasonic KX-TA624 User Manual

I

Intercom Calling

Allows you to make a call to another extension.
Using the handset
Any Telephone
Lift the handset.
Using the Speakerphone
PT
SP-PHONE
Press SP-PHONE
or INTERCOM.
Using a DSS (Direct Station Selection) button
PT
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
• After dialing an extension number, you will hear one of the following tones.
Ringback tone: Indicates the destination extension is being called.
Confirmation tone: Indicates you can perform voice calling (e.g., Paging).
Busy tone: Indicates the destination extension is busy.
Do Not Disturb (DND) tone: Indicates the destination extension has set the "Do
PT • An extension number and a name, if programmed, are shown on a display PT during an
intercom call.
PT • You can assign a DSS button on a flexible button through Station Programming. The
stored number can be displayed by pressing the desired DSS button while on-hook.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Direct Station Selection (DSS) Button
• System Programming — Installation Manual
[009] Extension Number Assignment
[604] Extension Name Setting
3-74
Telephone Features
extension no.
Enter the extension number
(100 through 199).
INTERCOM
extension no.
or
Enter the extension number
(100 through 199).
Press the flexible button
assigned as a DSS button.
3.2 Telephone Features
Talk.
Talk.
Talk.
Not Disturb (DND)" feature.
Hang up.
SP-PHONE
Press SP-PHONE.
Hang up or press
SP-PHONE.