Panasonic KX-TA624 User Manual page 31

2.1 Station Programming Instructions
To confirm the assigned data
—Be sure that you are in the Station Programming mode. Set the MEMORY switch to
"PROGRAM".
PT
program access number
Enter the program access number.
• Enter the program access number* as follows.
- 1: Preferred Line Assignment — Outgoing
- 2: Preferred Line Assignment — Incoming
- 3: Outside (CO) Line Ringing Selection
- 4: Intercom Alert Assignment
- 5: Call Waiting Tone Type Assignment
- 6: Self-Extension Number Confirmation (KX-T7030, KX-T7130 and KX-T7135 only)
- 7: Extension Password Set (Manager only)
- 0: Date and Time Setting (Operator/Manager only)
• The display shows the programmed data.
<PT Display Example>
When you press "5", the display shows:
C.W.Tone-1
— To exit the Station Programming mode, set the MEMORY switch to "SET".
— If you wish to change the data, follow the programming procedure explained in this
section.
* A program access number is required to program/confirm the data by Station Programming.
HOLD
Press HOLD.
• The display shows the initial programming mode.
— The Call Waiting tone is currently programmed to Tone 1.
Station Programming (Personal Programming)
2-3