Canon Finisher-AK1 Service Manual page 359

NOTE:
Step 4) to 7) are needed to be performed only for the Saddle Finisher.
4) Affix over the LED Lamp Label. (Europe, Asia/Oceania only)
LED Lamp Label
5) Pull out the Saddle Unit.
7
Installation > Attaching the Labels
F-7-122
F-7-123
7 Installation > Attaching the Labels
6) Affix the Saddle Return Attention Label according to the location over the existing ones.
7) Put the Saddle Unit back.
8) Close the Finisher Front Cover.
7-43
Saddle Return
Attention Label
F-7-124
7-43