Removing The Feed Guide Lower Static Eliminator - Canon Finisher-AK1 Service Manual

4
Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Feed Guide Lower Static Eliminator > Procedure
2) Remove the Harness Cover [1].
• 2 Screws [2]
x2
3) Remove the Saddle Stapler[1].
• 1 Connector [2]
• 2 Screws [3]
[2]
4 Parts Replacing and Cleaning > Saddle Stitcher Assembly > Removing the Feed Guide Lower Static Eliminator > Procedure
[2]
[1]
[2]
F-4-221
[1]
[3]
F-4-222

Removing the Feed Guide Lower Static Eliminator

■ Preparation
1) Open the Front Cover.
2) Pull out the Saddle Unit.
3) Remove the Saddle Stapler.(Refer to page 4-91)
■ Procedure
1) Remove the 3 Feed Guide Lower Static Eliminators [1].
4-92
[1]
F-4-223
4-92