Canon Finisher-AK1 Service Manual page 297

5
Adjustment > Auxiliary Adjustment > Changing Lower Delivery Mode > Procedure
3) Press push switch SW384 [1] to execute setting.
• 0: Normal mode
• 1: Forcible 1 sheet through delivery mode (all)
• 2: Forcible stack delivery (with buffer) mode (alignment is not performed)
• 3: Forcible stack delivery (without buffer) mode (alignment is performed on the process
tray)
• 4: Forcible 1 sheet alignment delivery mode (alignment is performed on the process
tray with 1 sheet)
• 5: Forcible 1 sheet through delivery mode (plain paper only)
SW382
SW381
SW383 SW384 SW385
(-) (+)
NOTE:
Under normal circumstances, coated paper is delivered after having been aligned on
the process tray while normal paper is passed through to be delivered.
However, 1 sheet of coated paper is passed through to be delivered.
5 Adjustment > Auxiliary Adjustment > Changing Lower Delivery Mode > Procedure
ENTER
[1]
F-5-310
4) Press switch SW385 [1] again to complete this adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
[1]
F-5-311
5-126
5-126