5
Adjustment > Adjustment at Time of Parts Replacement > Adjusting Position of Saddle Lead Edge Stopper
Adjusting Position of Saddle Lead Edge Stopper
Execute this adjustment in the case of displacement in saddle fording position or replacing
the finisher controller PCB.
1) Output paper from the saddle assembly and measure displacement amount (C) for folding
position.
[C]
15)
Pull out the saddle assembly, and then remove the PCB cover [1].
• 6 screws [2]
[1]
5
Adjustment > Adjustment at Time of Parts Replacement > Adjusting Position of Saddle Lead Edge Stopper
F-5-118
[2]
[2]
F-5-119
16)
Free the harness [1] from the Harness Guide [2].
• 12 Connectors [3]
[1]
[3]
[3]
[2]
[3]
[3]
[3]
F-5-120
5-50
5-50