Appendix; Mounting Your Device In A Vehicle; Garmin Powerswitch; Mounting Considerations - Garmin ZUMO XT2 Owner's Manual

Mounting Your Device in a Vehicle

See the Important safety and product information guide in the product box for product warnings and other
important information.
This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the device out of direct sunlight.
Do not use the suction cup mount on a motorcycle.
Before mounting the device, check the local laws pertaining to windscreen mounting.
NOTE: the vehicle mount is an optional accessory. Go to
1 Plug the automotive power cable
2 Remove the clear plastic from the suction cup
3 Clean and dry your windscreen and the suction cup with a lint-free cloth.
4 Press the suction cup to the windscreen, and flip the lever
5 Snap the cradle onto the suction-cup arm.
6 Fit the top of your device into the cradle.
7 Press the device into the cradle until it snaps into place.
8 Plug the other end of the automotive power cable into a power outlet.

Garmin PowerSwitch

Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems
install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can
cause bodily injury.
You can use a connected Garmin PowerSwitch device to control lights, fans and more from your zūmo device.

Mounting Considerations

• The device must be mounted close to the battery and within the range of the supplied power cable.
• The mounting surface must be strong enough to support the weight of the device.
• The location must allow room for the routing and connection of all cables.
54

Appendix

WARNING
NOTICE
garmin.com
into the port on the device.
.
WARNING
to purchase optional accessories.
back toward the windscreen.
Appendix