Panasonic RealPro Elite EP3222 Operating Instructions Manual page 24

USING THE SELF PROGRAM
Changing Time Settings Part Way through a Massage
1. Open the cover and input the time
settings.
self program time input
neck/shoulder
back
OK
lower back
lower body
Advanced Usage
Saving Time by Recording Time Settings
Recording Time Settings
After the massage finishes or
When the
Press the User Memory button you
want to record your settings to.
user
When the Selected Button Flashes Rapidly
Rapid Flashing
user
Beginning a Massage Using Recorded Time Settings
(1) Press .
(2) Press the button used
to record your data.
(3) Press .
Changing Recorded Time Settings
See "Changing Time Settings Part Way through a Massage" above.
22
(1) Open the cover and input the time
settings you want to change.
(2) Press after completing setting
OK
adjustments.
The program will be reconfigured
to reflect the change(s) made to
settings.
is pressed to finish the massage, proceed as follows.
user
buttons flash...
Only Pressed Button
Flashes
• This indicates that settings have already been recorded using that User Memory button.
To record over the existing data, press the same button once more. (The existing data
will be deleted.)
To keep the existing data, press another User Memory button.
user
2. Close the cover.
• If the cover is left open, you will be unable
to use the Leg Stretch OFF/ON, Program
Strength or Focus buttons during the
massage.
user
Recording Complete
self program
time
• The recorded time settings will
be displayed.
The program with the recorded
time settings will begin
immediately.