Panasonic RealPro Elite EP3222 Operating Instructions Manual page 12

Attaching the Control Panel Stand Covers (On Both Right and Left Sides)
Cover for Side WITH Control Panel Stand
Bottom
Tabs
1
Notches
When Removing the Control Panel Stand Covers
(1) (2)
Attaching the Pillow
10
Top Tabs
2
(3)
Cover for Side WITHOUT Control Panel Stand
The method of attaching the covers is the same
for both sides.
• Diagram shows side attached with control
panel stand.
1. Insert the bottom tabs on the cover
into the notches on the armrest.
2. Insert the top tabs on the cover
into the notches on the armrest.
(1) Insert the head of a flat-tip screwdriver
between the top tabs of the cover.
• Performing this procedure with the Allen key
or a cross-point screwdriver could damage the
unit.
(2) Pull out the top tabs of the cover (two places)
using the flat-tip screwdriver.
(3) Pull up on the cover at an angle.
Use the pillow fasteners to attach the
pillow.