Table of Contents
Advertisement
OM3211 08/11
MESSAGE FOR OPERATION AND MAINTENANCE ("MOM")
"MOM" (Message for Operation and Maintenance) is
the message display screen located in the upper
panel just above the operator's head. It is used to
display messages to the operator and service per-
sonnel. The screen incorporates touch switches on
its surface, to change displays. Data that "MOM" can
display includes:
Truck Condition-
When the key switch is turned to the run position
before cranking, the display will read OK or WAIT. If
the WAIT warning is present, the reason will also dis-
played. If the engine is running and the truck is ready
to be moved, the screen will indicated departure is
OK or WAIT. If the WAIT warning is present, the rea-
son will also be displayed.
Production Data During Operation - (Information
from the Payload Meter)
• The Current Payload
• The Total Payload
• The Total Number Of Cycles
• Fault Information At The Time Of Occurrence
• The Fault Code And Its Description
• The Action Code And Its Description
• Other Function - Clock
NOTE:
The
operator
recommendation that is displayed on the "MOM"
screen. However, the operation of the truck is not
prohibited. Even if the screen displays WAIT, the
truck can still be operated if an emergency situation
exists.
should
follow
the
Operator Cab and Controls - Section 32
1. Screen i1, Initial Message
After the key switch is turned on, the initial message
(i1) is displayed for three seconds after a system
message is displayed. The picture number, i1, the
title, and the program version number are all indi-
cated on this screen. After being displayed for three
seconds, i1 is changed to the first initial check,
Check 1, screen i2, automatically.
If any of the controllers detect a fault in their system,
the i1 screen is changed to the display of the warning
message i6 automatically after three seconds.
2. Screen i2, Initial Check 1
Page 32-29
Advertisement
Table of Contents
