Table of Contents
Advertisement
OM2032 03/13
TOWING
•
Improper towing methods may lead to serious
personal injury and/or damage.
•
Use a towing device with ample strength for the
weight of this machine.
•
Never tow a machine on a slope.
•
Inspect all towing apparatus for damage. DO
NOT use tow rope that has kinks or is twisted.
•
DO NOT stand near the towing cable during
towing.
•
When connecting a machine that is to be towed,
DO NOT allow anyone to go between the tow
machine and the machine that is being towed.
•
Set the coupling of the machine being towed in a
straight line with the towing portion of the tow
machine, and secure it in position.
For towing methods, refer to Section 30,
Operating Instructions - Towing.
WORKING NEAR BATTERIES
Battery Hazard Prevention
•
Battery electrolyte contains sulfuric acid and can
quickly burn the skin and eat holes in clothing. If
acid comes in contact with any part of the body,
immediately flush the area with water.
•
Battery acid can cause blindness if splashed into
the eyes. If acid gets into the eyes, flush them
immediately with large quantities of water and
see a doctor at once.
•
If acid is accidentally ingested, drink a large
quantity of water, milk, beaten eggs or vegetable
oil. Call a doctor or poison prevention center
immediately.
•
When working with batteries always wear safety
glasses or goggles.
•
Batteries generate hydrogen gas. Hydrogen gas
is very explosive and is easily ignited with a small
spark of flame.
•
Before working with batteries, stop the engine
and turn the key switch to the OFF position.
•
Avoid
short-circuiting
through accidental contact with metallic objects,
such as tools across the terminals.
•
When removing or installing, check which is the
positive (+) terminal and negative (-) terminal.
•
Tighten battery caps securely.
•
Tighten the battery terminals securely. Loose
terminals can generate sparks and lead to an
explosion.
Starting With Booster Cables
•
Always
wear
safety glasses or
goggles
when
starting
the
machine
with
booster cables.
•
When
using
booster
cables,
DO NOT allow the two machines to touch.
•
Connect the positive (+) cable first when
installing booster cables. Disconnect the ground
or negative (-) cable first during removal.
•
If any tool touches between the positive (+)
terminal and the chassis, it will cause sparks.
Always use caution when using tools near the
battery.
•
Connect the batteries in parallel: positive to
positive and negative to negative.
•
When connecting the ground cable to the frame
of the machine to be started, connect it away
from the battery to minimize the risk of explosion.
Safety - Section 20
Page 20-9
the
battery
terminals
Advertisement
Table of Contents
