Intended Use; Cleaning/Recycling The Product; Liquid Spills; Moving Or Storing The Ms - Agilent Technologies 7200 Operation Manual

Intended Use

Agilent products must only be used in the manner described in the Agilent
product user guides. Any other use may result in damage to the product or
personal injury. Agilent is not responsible for any damages caused, in whole or
in part, by improper use of the products, unauthorized alterations,
adjustments or modifications to the products, failure to comply with
procedures in Agilent product user guides, or use of the products in violation
of applicable laws, rules or regulations.

Cleaning/Recycling the Product

To clean the unit, disconnect the power and wipe down with a damp, lint-free
cloth. For recycling, contact your local Agilent sales office.

Liquid Spills

Do not spill liquids on the MS.

Moving or Storing the MS

The best way to keep your MS functioning properly is to keep it pumped down
and hot, with carrier gas flow. If you plan to move or store your MS, a few
additional precautions are required. The MS must remain upright at all times;
this requires special caution when moving. The MS should not be left vented to
atmosphere for long periods. For more information, see "To Move or Store the
MS" in the Agilent 7200 Q-TOF GC/MS Troubleshooting and Maintenance
Manual.
7200 Accurate-Mass QTOF Operation Manual
1
Introduction
21