Starting Up The Lsqm1Wcmb0; Checks Before Power-On - H3C LSQM1WCMB0 Installation Manual

box (see Figure 10 ). Select VT100 or Auto detect from the Emulation drop-down list,
and click OK to return to the HyperTerminal window.
Figure 10 Set the emulation type

Starting up the LSQM1WCMB0

Checks before power-on

Before starting up the access controller module, verify that:

The power cables and ground cable are correctly connected.

The power outlet voltage meets the voltage requirement of the switch.

The console cable is correctly connected, the console terminal or PC is running,
and the terminal parameters are properly set.
21