Page 1
H3C LSQM1WCMB0 Access Controller Module Quick Start Guide Abstract This document provides steps for the basic installation of the LSQM1WCMB0 access controller module for the H3C S7502E/S7503E/S7506E/S7506E-V/S7510E Ethernet switches. Hangzhou H3C Technologies Co., Ltd. http://www.h3c.com...
Page 2
However, the statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Hangzhou H3C Technologies Co., Ltd. and its licensors shall not be liable for technical or editorial errors or omissions contained herein.
LSQM1WCMB0 AC module quick start guide NOTE: The models listed in this manual are not applicable to all regions. Please consult H3C representatives for the models applicable to your region. Further information, such as optional installation and configuration procedures and technical specifications about connections and power is available in the H3C LSQM1WCMB0 Access Controller Module Installation Guide.
Installation tools and meters When installing the access controller module, you may need the tools listed in Table 1 These installation tools and meters are not shipped with the LSQM1WCMB0. Table 1 List of installation tools and meters Type...
Console cable connection The console cable is an 8-core cable with an RJ-45 connector at one end for the console port of the LSQM1WCMB0 and a DB-9 female connector at the other end for the 9-pin serial port of a configuration terminal.
When the LSQM1WCMB0 is powered on, H3C recommends using the following order when connecting or disconnecting the console cable: When connecting the LSQM1WCMB0 to a PC, first connect the DB-9 connector of the console cable to the PC and then connect the RJ-45 connector to the LSQM1WCMB0. ...
Setting up a configuration environment Set up a configuration environment by connecting the console port of the LSQM1WCMB0 access controller module to a console terminal, a PC in this example. Connecting the console cable Connect the DB-9 female connector of the console cable to the serial port of the Connect the RJ-45 connector of the console cable to the console port of the LSQM1WCMB0 module.
Type a name, H3C in this example, for the new connection in the Name field and click OK. The Connect To dialog box appears. Using the Connect using drop-down list, select the serial port to which the console cable is actually connected. Click OK.
To learn more about access controller software maintenance, see H3C Access Controller Modules Software Upgrade Guides. Configuration For details on configuring your module, see the H3C WX Series Access Controllers Configuration Guides and H3C WX Series Access Controllers Command References on our website:...