Electrical Connection; General - Wolf DV-2 Operation Instructions Manual

Electrical connection

General

The DV-2 fan is equipped with an EC motor. This motor is equipped with electronic components. These electronic
components protect the motor against e.g. overloads which means that a motor protection switch is not necessary.
The power wire must be protected by a type C circuit breaker.
DV-2
An external potentiometer or a 0-10 Volt signal must be connected to the DV-2
DV-2 230 V
DV-2 400 V
3064772_202303 WOLF GmbH | 39