Table of Contents
Advertisement
Prerequisites: This feature is only available when enabled by your service provider. See
Messaging System (RMS) on page 161
Procedure:
1 Use one of the following options:
Option
The radio is in RMS mode
The radio is not in the RMS
mode
NOTE: The navigation through the radio menu is only available if your service provider
enabled the Send RMS/FMS menu item. However, your service provider can configure
a One Touch Button to display the Send RMS/FMS menu even if the navigation is not
possible.
If the radio is not in RMS Mode, and the Send RMS/FMS menu item is disabled, and no
One Touch Button is configured to display the Send RMS/FMS menu, then the radio can
only receive RMS messages but cannot send them.
2 Perform one of the following actions:
•
Press and hold a required key (for RMS status 0–9).
•
Press the required two keys combination (for RMS status 10–99).
•
Scroll to the required RMS status.
•
Type out a message using RMS Free Text (available in SDS-TL only).
4.3.11
Additional Address
The Additional Address feature allows the radio to send Radio Messaging System (RMS) messages
and Local Information Protocol (LIP) reports to additionally defined recipients.
The default addresses for the RMS messages and LIP reports are defined by your service provider.
RMS messages and LIP reports are also sent to selected and enabled additional address.
You can create, edit, and delete additional addresses using the radio menu. For service provider-
configured additional addresses, your service provider can disable the editing and deletion of the
additional addresses.
You can define up to 30 additional addresses.
for details.
Actions
Go to
step
2.
NOTE: RMS mode is only applicable for
MTP8550Ex.
a Perform one of the following actions:
•
From the home screen, press Menu→Messag-
es→Send RMS/FMS.
•
Press and hold the One Touch Button configured to
display the Send RMS/FMS menu.
•
Use a menu shortcut assigned to the Send RMS/FMS
menu.
b Perform one of the following actions:
•
For MTP8500Ex – Scroll to the required RMS status.
•
For MTP8550Ex – Go to
MN006260A01-AG
Chapter 4 : Main Menu
Radio
step
2.
91
Advertisement
Table of Contents
