Additional Address; Enabling Or Disabling Additional Address; Selecting Additional Address - Motorola MTP8550E Series User Manual

Table of Contents

Advertisement

MN002041A01-AG (en-US)
Main Menu
NOTICE: The navigation through the radio menu is only available if your service provider
enabled the Send RMS/FMS menu item. However, your service provider can configure a
One Touch Button to display the Send RMS/FMS menu even if the navigation is not
possible.
If the radio is not in RMS Mode, and the Send RMS/FMS menu item is disabled, and no
One Touch Button is configured to display the Send RMS/FMS menu, then the radio can
only receive RMS messages but cannot send them.
2 Do one of the following:
Press and hold a required key (for RMS status 0–9).
Press the required two keys combination (for RMS status 10–99).
Scroll to the required RMS status.
Type out a message using RMS Free Text (available in SDS-TL only).
4.3.11

Additional Address

The Additional Address feature allows the radio to send RMS messages, and Local Information
Protocol (LIP) reports to additionally defined recipients.
The default addresses where the radio sends RMS messages and LIP reports are defined by your
service provider. If an Additional Address is selected and enabled, RMS messages and LIP reports are
also sent to the recipient defined in the Additional Address.
You can create, edit, and delete Additional Addresses using the radio menu. If an Additional Address is
DRAFT
configured by your service provider, the service provider can disable edition and deletion of the
address using the radio menu.
You can define up to 30 Additional Addresses.
4.3.11.1

Enabling or Disabling Additional Address

Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Additional Address → Enable.
3 Select one of the following:
On – to activate the feature
Off – to deactivate the feature
4.3.11.2

Selecting Additional Address

Procedure:
1 From the home screen, press the Menu key.
2 Select Messages → Additional Address → Select Address.
Select Address display appears with an available list of aliases.
3 Scroll through the list to highlight your alias and press Select.
80

Advertisement

Table of Contents
loading

Table of Contents