Panasonic AJ-D455 Operating Instructions Manual page 27

USER menu
<EDIT>
No.
303
304
305
306
307
309
310
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
STD/ 0000
NON-STD 0001
0002
SERVO 0000
REF 0001
EDIT 0000
RPLCE1 0001
0002
0003
EDIT 0000
RPLCE2 0001
0002
0003
EDIT 0000
RPLCEC 0001
0002
0003
AUD EDIT 0000
IN 0001
AUD EDIT 0000
OUT 0001
AUTO This selects STD or NON-STD in accordance with the com-
posite input signal.
STD
0: Standard/non-standard signals are automatically identified
N-STD
and processed.
1: Standard signals are processed. (Forced STD)
2: Non-standard signals are processed. (Forced NON-STD)
AUTO This selects the video signal processing.
0: Servo is synchronized with the input signal during recording
EXT
and editing, or with the REF signal during playback.
1: Servo is synchronized at all times with the REF signal.
N-DEF This sets the channel assignments for the controller's analog
audio preset when editing the digital audio of the VTR using a
CH1
controller which does not have a digital audio edit preset
CH2
control function.
CH1+2
This selects the channel concerned when the VTR CH1 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
N-DEF This sets the channel assignments for the controller's analog
audio preset when editing the digital audio of the VTR using a
CH1
controller which does not have a digital audio edit preset
CH2
control function.
CH1+2
This selects the channel concerned when the VTR CH2 edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
This sets the channel assignments for the controller's analog
N-DEF
audio preset when editing the digital audio of the VTR using a
CH1
controller which does not have a digital audio edit preset
CH2
control function.
CH1+2
This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 or CH2 edit preset.
CUT This selects the connection method for the digital audio edit IN
point.
FADE
0: Cut processing
1: V Fade processing
CUT This selects the connection method for the digital audio edit
OUT point.
FADE
0: Cut processing
1: V Fade processing
27
Description