Panasonic AJ-D455 Operating Instructions Manual page 19

Saving a user file
1
Press the MENU button.
2
While holding down the FILE button, press the
3
Press the or
No. A01 (SAVE).
SETUP-MENU
<USER1>
723 DV PB ATT
A00 LOAD
A01 SAVE
A02 P.ON LOAD
END
4
Press the or button and select the user file into which the USER1 contents are to
be saved. User files which have been set to the lock mode are not displayed. When all
the user files have been set to the lock mode, the "LOCKED" display appears and the
contents cannot be saved.
5
Press the SET button. The following messages appear on the menu screen and
counter display.
Menu screen
SETUP-MENU SAVE
USER1
The user file number selected in step 4 is displayed in the shaded area.
6
Press the PLAY button. The contents of the USER1 file are saved in the user file which
was selected in step 4 and stored in the memory. When the STOP button is pressed,
the USER1 menu display appears while the settings remain unchanged.
7
Press the or
item except No. A00 (LOAD) and No. A01 (SAVE).
8
Press the SET button. The USER1 settings are now stored in the memory.
If the USER1 settings are not going to be stored in the memory, do not press the SET
button but press the MENU button.
Automatic loading of user file when the power is turned on
When the user file to be loaded is selected in advance using setup menu item No. A02 (P.ON
LOAD), it can be automatically loaded into USER1 when the power is turned on.
button and move the cursor ( ) on the menu screen to setup item
MENU
NO.A00 - 0000
OFF
USER2
USER2
OFF
USER2 OK?
YES<PLAY>/NO<STOP>
button and move the cursor ( ) on the menu screen to any setup
19
or button, and select USER1.
Counter display
S U1 -U2