User Menu; Basic - Panasonic AJ-SD255 Operating Instructions Manual

Setup menus (continued)
USER menu <BASIC>
No./Item
001 This selects the buttons which can be
operated on the front panel when the
LOCAL ENA
CONTROL switch has been set to
REMOTE.
0000
No buttons can be operated.
0001 ST&EJ :
Only the STOP and EJECT buttons
can be operated.
0002
All buttons can be operated.
002
This selects the 12 or 24 hour display
for the CTL counter.
TAPE TIMER
0000 ±12h : 12 hour display
0001
003
This selects whether the remaining
tape time and total tape length are to
REMAIN SEL
be displayed in the superimposed
display of the VIDEO MON connector
signals.
0000
0001
The remaining tape time is displayed
on the second line.
0002
The remaining tape time is displayed
on the first line.
0003 R/TTL :
The remaining tape time is displayed
on the first line, and the total tape
length is displayed in the second line.
Notes:
• When "2L" is selected, the remaining
tape time is not displayed if "TIME" or
"VITC" has been selected as the setup
menu item No.008 (DISPLAY SEL)
setting.
• When "R/TTL" is selected, the total tape
length is not displayed if "TIME" or
"VITC" has been selected as the setup
menu item No.008 (DISPLAY SEL)
setting.
The underlined items indicates the initial setting.
Description
DIS :
ENA :
24h : 24 hour display
OFF: No display.
2L :
1L :
No./Item
008
This selects what information is to be
provided by the time code and other
DISPLAY SEL
super displays output to the VIDEO
MON connector.
0000
(The data indicates the value for
whichever of CTL, TC or UB currently
selected by the COUNTER button.)
0001 T&STA :
Data and operation status.
0002 T&S&M :
Data, operation status and mode.
0003 T&RT : Data and REC TIME
0004 T&YMD :
Data and REC DATE
(year/month/day)
0005 T&MDY :
Data and REC DATE
(month/day/year)
0006 T&DMY :
Data and REC DATE
(day/month/year)
0007 T&UB :
Data and user bit.
However, when UB has been selected
with the COUNTER button, the time
code is displayed after the user bit.
0008 T&CTL :
Data and CTL data.
However, when CTL has been
selected with the COUNTER button,
the time code is displayed after the
CTL data.
0009
The data and time code recorded in
the VAUX area are displayed.
0010
The time code and user bit recorded in
the VAUX area are displayed.
Notes:
• Mode display:
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
• An error message appears if a warning
or error has occurred when "T&S&M"
has been selected as this setting.
• REC TIME and REC DATE are displayed
during DV/DVCAM, playback only. With
the DVCPRO (25 Mbps) format, the
operating mode is displayed.
Description
TIME : Data only.
T&T :
VITC:
21