Panasonic AJ-D455 Operating Instructions Manual page 24

Setup menus
USER menu
<OPERATION>
No.
101
102
103
104
106
107
109
110
111
112
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
SHTL MAX 0000
0001
0002
FF. REW 0000
MAX 0001
0002
AUDIO 0000
MUTE 0001
REF 0000
ALARM 0001
PLAY 0000
.
.
.
DELAY
0015
CAP.LOCK 0000
0001
EJECT EE 0000
SEL 0001
0002
F/R EE SEL 0000
0001
STOP EE 0000
SEL 0001
AUTO REW 0000
0001
16 This sets the maximum speed for shuttle operations.
0: 16 normal speed
32
1: 32 normal speed
60
2: 60 normal speed
<Note>
When a DV or DVCAM cassette is used, the 32 speed will be
set even if " 60" has been selected as this item's setting.
This sets the maximum speed for FF and REW operations.
32
0: 32 normal speed
60
1: 60 normal speed
100
2: 100 normal speed
<Note>
When a DV or DVCAM cassette is used, the 32 speed will
be set regardless of what has been selected as this item's
setting.
OFF This sets the status until the audio signal is output when
operation switches from the stop or search modes to the play
ON
mode.
0: The time until the audio is output is shortened.
1: The audio is output after the status stabilizes.
<Note>
When set to 0 (OFF), the sound in the initially output part is
incomplete. Therefore, this setting is not recommended for
broadcasts.
This selects whether to warn the operator when the
OFF
REF.VIDEO signal has not been connected.
ON
0: Warning is not given.
1: Warning is given by the flashing STOP lamp.
This set the play delay time in frame increments.
0
.
.
.
15
This selects the capstan lock mode.
2F
0: 2F mode
4F
1: 4F mode
EE For selecting the video and audio output status when the tape
is ejected.
BLACK
0: EE mode
GRAY
1: Video blackens, audio mutes.
2: The images appear in gray, and the sound is muted.
This selects whether EE mode or playback mode is to be used
EE
during FF/REW operations.
TAPE
0: EE mode
1: Playback mode
This selects whether EE mode or playback mode is to be used
EE
during stop mode.
TAPE
0: EE mode
1: Playback mode
<Note>
This setting is complied with even in the standby OFF mode.
However, the images will appear in gray when "TAPE" has
been selected.
This selects whether to rewind the tape automatically to the
OFF
tape start when the tape end is detected.
ON
0: The tape stops at the tape end.
1: The tape is rewound to the tape start.
24
Description