Setup; I Item List Of The Setup Menu - Panasonic WJ-HD309 Operating Instructions Manual

SETUP

To operate this unit, it is necessary to set each item of the SETUP MENU in advance.
Perform the settings for each item of the SETUP MENU by displaying the SETUP MENU on monitor 2.
Settings items are as below.

I Item list of the SETUP MENU

Settings menu
Maintenance
REC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Data Delete
Event Log
Error Log
Access Log
Recording
REC Setup
Emergency REC
Event
Event Setup
VMD Setup
Alarm Setup
Terminal Setup
Schedule
Time Table
REC Program
Event Program
Special Days
90
Display the recording rate for each recording mode and image quality for each
camera channel in list form.
Display hard disk information such as the available disk space on the built-in hard
disk and the connected optional extension unit.
Display version information of the software and the hardware and the MAC
address.
Set actions to be taken when the available space of the built-in hard disk or of the
connected external recording device reaches a specified level.
Set to display a warning when the available space of the built-in hard disk or of the
connected external recording device reaches a specified level.
Delete data stored on the hard disk, or format (initialize) the DVD-RAM disk con-
nected to the COPY port.
Display the event log. Refer to page 44 for further information.
Display the error log such as a HDD error log.
Display the time, user name and IP addresses when logging in/out to/from this
unit.
Perform the basic settings for recording.
Perform the settings for emergency recording such as recording time and record-
ing rate.
Perform the settings for the alarm output duration and the buzzer sound when an
event (motion detection, video loss, command/terminal alarm) occurs.
Perform the settings for the motion detection area, sensitivity and the detection
mode for each camera channel.
Perform the settings for the alarm display duration and alarm suspension duration.
Specify the alarm terminal polarity.
Create timetables for each day of the week, and assign the recording action pro-
grams and event action programs to the created timetables.
Up to 4 recording programs can be created. Perform the settings for the recording
actions for each program such as image quality and recording rate for each cam-
era channel.
Up to 4 event programs can be created. Perform the settings for each program
such as the event action and the auto copy function for each event type.
Assign timetables independently for special days aside from other days.
Description Page
94
94
94
95
95
95
96
96
97
98
99
100
100
103
104
108
105
107
109