Windows Nt 4.0 (Administrator Settings) - Panasonic WORKIO DP-2310 Operating Instructions Manual

Configuring the Printer Driver Settings

Windows NT 4.0 (Administrator Settings)

General Tab
1. Comment
Enter comments to the properties, if any.
If another user sets up this printer on his or her computer when sharing the printer, the comment specified
here will also appear on that computer. However, the comment displayed for an existing user will remain
unchanged even if the comment is modified later.
2. Location
Specifies the printer location.
3. Driver
Displays the printer driver type. Specify the printer being used or a printer model that can be emulated
with the printer being used.
Click
4.
Separator Page...
This feature is not available on your machine.
5.
Print Processor...
Specify the processor to be used for printing (Print Processor) and the data type (Default Data type).
The processor and data type affect the manner in which the printer functions in Windows NT. Normally
they do not need to be modified. However, modification might be necessary when the printer is used with
a special application.
6.
Print Test Page
Prints a test page. This allows the user to verify if the printer is installed properly.
NOTE
64
button updates or modifies the printer driver.
New Driver...
button
button
button
1. In Windows NT 4.0, setting the properties depends on the logon account. This section
describes properties to be specified by the administrator (system manager).
See "Printing from Windows Application" for details on user properties. (See page 103)