When Logging On Without Administrator Authority - Panasonic PT-F100NT Network Manual

Panasonic pt-f100nt: user guide
Hide thumbs Also See for PT-F100NT:
Table of Contents

Advertisement

Connecting with wireless LAN

When logging on without administrator authority

Before getting started Wireless Manager ME 5.5, the PC's IP setting must be set to [Acquire IP address automatically]. Before
use, contact your network administrator to make sure the proper setting.
A Projector settings
1
Turn on the projector and press the [NETWORK] button on the remote control.
2
Press the menu button to open the [NETWORK] menu, and then select from among
[USER 1] through [USER 3] for [WIRELESS LAN] and press [ENTER].
3
In wireless LAN detailed setting 1/3, turn off [DHCP
[SUBNETMASK
<Example>
WIRELESS DETAILED SETUP
RETURN
SELECT
ENTER
※"Glossary" (See page 71)
• Wireless LAN and wired LAN cannot be used in the same segment.
• When multiple devices are connected, a unique IP address must be allocated to each device.
4
In wireless LAN detailed setting 2/3, enter [SSID
and then click [NEXT].
<Example>
WIRELESS DETAILED SETUP
RETURN
SELECT
ENTER
※"Glossary" (See page 72)
• SSID has to be entered in lower-case alphanumeric letters.
• See pages 54 to 56 for information on other network settings.
5
Press [OK] in wireless LAN detailed setting 3/3.
], and [DEFAULT GATEWAY
USER1
1/3
USER1
NAME CHANGE
OFF
DHCP
IP ADDRESS
192.168. 11.100
SUBNETMASK
255.255.255.
GATEWAY
192.168. 11. 1
NEXT
CANCEL
USER1
Panasonic Projector
SSID
AD HOC
MODE
AUTHENTICATION
OPEN
ENCRYPTION
NONE
CHANNEL
1
RETURN
NEXT
CANCEL
(cont.)
], configure [IP address
], and then click [NEXT].
0
] and set [MODE] to [AD HOC
2/3
25
],
],

Advertisement

Table of Contents
loading

Table of Contents