Md Edit; Registering The Disc Title And Track Title - Aiwa CSD-MD5 Operating Instructions Manual

MD EDIT

REGISTERING THE DISC TITLE
AND TRACK TITLE
REGISTERING THE DISC TITLE
2
4
4
CANCEL
1
Press MD e to select MD function and insert
an MD.
2
Press TITLE in stop mode.
"Disc Title ?" is displayed for 10 seconds.
3
Within 10 seconds, press ENTER.
The unit turns into character entry mode.
4
Enter a character.
(1) Press CHARACTER repeatedly to select the kind of
character (capital letters, small letters or number/
symbols).
→ Capital letters → Small letters —
(2) Turn JOG DIAL to select a desired character.
(3) Press CURSOR b after you have selected a
character.
The selected character stops flashing and the flashing
moves to the right.
5
Repeat step 4 to enter all the characters (up to
50 characters).
6
Press ENTER.
When z MD EJECT is pressed to eject a disc, TOC
EDIT is displayed and the data concerning the contents
of the editing are registered.
18
ENGLISH
1
1
4
3, 6
DELETE
SPACE
Numbers/symbols ←
To cancel entering
Press CANCEL.
To change a character
Press CURSOR B or b repeatedly until the character to be
changed flashes. Then enter the desired character again.
To delete characters
Press CURSOR B or b repeatedly until the character to be
deleted flashes. Then press DELETE.
To insert a space between the characters
Press CURSOR B or b repeatedly until the part to be
entered as a space flashes. Then press SPACE.
These symbols can be used
! " # $ % & ' ( ) * + , - . / : ; < > ? @ _ `
NOTE
If the unit is left for one minute at steps 4 and 5, the
character entry mode is canceled.