Sound; Adjusting The Sound - Aiwa CSD-MD5 Operating Instructions Manual

Md/cd stereo radio receiver
Hide thumbs Also See for CSD-MD5:
Table of Contents

Advertisement

Available languages

Available languages

SOUND

ADJUSTING THE SOUND

VOLUME
T-BASS
QSOUND
GEQ
VOLUME
Press VOLUME.
The volume level is displayed as a number from 0 to MAX
(31).
The volume level is automatically set to 20 when the power
is turned off when the volume level is set to 21 or more.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
NOTE
Low frequency sound may be distorted when the T-BASS
system is used for a disc in which low frequency sound is
originally emphasized. In this case, cancel the T-BASS
system.
QSOUND SYSTEM
The QSOUND system provides rich, three dimensional
sound.
Press QSOUND.
To cancel the QSOUND system
Press QSOUND again.
NOTE
At higher volumes, turning QSOUND on may cause sound
distortion. In this case, turn the volume down.
GRAPHIC EQUALIZER
This unit provides the following three different equalization
curves.
EQ ROCK: Powerful sound emphasizing treble and bass
EQ POP: More presence in the vocals and midrange
EQ JAZZ: Accented lower frequencies for jazz-type music
Press GEQ repeatedly.
The GEQ mode is displayed cyclically.
ROCK
POP
JAZZ
To select with the remote control
Press ROCK, POP or JAZZ.
To cancel the selected mode, press the selected button
again.
(cancel)
Using the headphones
Connect headphones with a stereo mini plug (ø 3.5 mm, 1/8
inch) to PHONES jack on the rear of the unit.
No sound is output from the speakers while the headphones
are plugged in.
→ EQ ROCK → EQ POP → EQ JAZZ → EQ OFF
(cancel)
En
E
F
13
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents