Panasonic KX-FP80 Operating Instructions Manual page 35

KX-FP80 (032-035) 00.2.21
Sending to pre-programmed parties in the broadcast memory
The same document will be sent to the specific parties whose numbers are stored in broadcast
memory.
The memory capacity is approx. 21 pages based on the ITU-T No. 1 Test Chart in standard
resolution (p. 73).
1 Insert the document FACE DOWN.
If necessary, press
repeatedly to select the desired setting (p. 26).
Rotate JOG DIAL
2
displayed.
Display:
Press FAX START
3
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (see below).
Note:
If you select the "FINE", "SUPER FINE" or "HALF
TONE" resolution, the number of pages that the unit
can transmit will decrease.
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialed up to 2 times after all of the other stations
have been called.
Broadcast sending report
BROADCAST REPORT
NO. OTHER FACSIMILE
01 Mike
02 Peter
03 Sam
04 Kim
9:46 AM Page 35
RESOLUTION
until the following is
<BROADCAST>
.
START TIME USAGE TIME
Jan. 10 09:31AM
Jan. 10 09:33AM
Jan. 10 09:34AM
Jan. 10 09:35AM
TOTAL
Total number of pages sent to
the fax server of the NetMoves
network (p. 29).
Sending Faxes
Display
JOG DIAL
FAX START
SET
To cancel the broadcast setting
STOP
1. Press
following message.
Display:
The display will show the following.
2. Press .
SET
Jan. 10 2000 09:36AM
YOUR LOGO :
YOUR FAX NO. :
PAGES (IQ-FAX)
01'10 02
01'08
02
01'09 02
01'10
02
004'37
008 (008)
The " " mark in this column shows the fax
has been sent to the fax server of the
NetMoves network (p. 29).
STOP
RESOLUTION
while the unit displays the
BROADCASTING
SEND CANCELED?
YES:SET/NO:STOP
RESULT
OK
OK
OK
OK
35