Table of Contents
Advertisement
Features Summary
Basic
features!
How to set menu options
The following method of programming is applied except features #01, #02 and #03. For features
#01, #02 and #03, refer to the programming table below.
MENU
1. Press
.
2. Press
or
is displayed.
3. Press
or
is displayed.
4. Press
.
SET
MENU
5. Press
.
Programming table
Code
Display & Feature
SET DATE & TIME
PRESS SET
#01
To set the date and time.
YOUR LOGO
#02
PRESS SET
To set your logo.
YOUR FAX NO.
PRESS SET
#03
To set your facsimile telephone
number.
SENDING REPORT
MODE=ERROR
#04
To print and check the sending
report for fax transmission results
(p. 31).
FAX RING COUNT
RINGS=3
#06
To change the number of rings
before the unit answers a call
in FAX ONLY mode
50
until the desired feature
until the desired setting
[±]
[±]
Note:
Step 3 may be slightly different
depending on the feature.
See page 49 for more details.
Settings
mm/dd/yy
See page 15 for details.
hh:mm
(2 digits for
each entry)
See page 16 for details.
(Up to 30
characters)
See page 18 for details.
(Up to 20
digits)
"ERROR": The sending report will
ERROR
be printed only when fax
transmission fails.
ON
"ON": The sending report will be
printed out after every transmission.
OFF
This setting is also available after
activating FAX ONLY mode (p. 39).
1, 2, 3, 4,
If you are using the unit with an
5 EXT.TAM
answering machine, set to "5
EXT.TAM" (p. 42).
(The default setting is in bold type.)
How the unit operates
Advertisement
Table of Contents
