Table of Contents
Advertisement
Features Summary
Advanced features
How to set menu options
MENU
1. Press
.
2. Press
or
displayed.
Display:
Press
and press
SET
the desired feature is displayed.
Programming table (cont.)
Code
Display & Feature
FAX ACTIVATION
MODE=ON
If you use an extension telephone
and wish to use it to receive a fax,
#41
activate this feature, and enter the
code (p. 44).
RECEIVE ALERT
MODE=ON
To alert you with a beeping sound
#44
when a document which has been
received is stored into memory due
to some existing problem.
FRIENDLY RCV
MODE=ON
#46
To receive a fax automatically when
you answer a call and hear a fax
calling tone (slow beep).
AUTO DISCONNECT
MODE=ON
To answer a call with an extension
#49
telephone in TEL/FAX mode
(p. 41).
54
(cont.)!
until the following is
ADVANCED MODE
PRESS SET
or
until
[±]
[±]
[±]
[±]
3. Press
or
is displayed.
4. Press
SET
5. Press
MENU
Note:
Step 3 may be slightly different depending on the
feature.
See page 49 for more details.
Settings
1. Follow steps 1 and 2 above.
2. Press
ON /
3. Press
CODE=
9
4. Enter your code from 2 to 4 digits,
using 0–9 and
5. Press
OFF
6. Press
Do not enter "0000".
If you are alerted by a slow
beeping sound, clear the printing
ON
problem and make sure the unit is
supplied with paper to print the
stored document. The beeps will
OFF
stop.
"ON": You do not have to press
ON
FAX/START
OFF
1. Follow steps 1 and 2 above.
ON /
2. Press
CODE=
0
3. Press
4. Enter your code from 2 to 4 digits,
using 0–9 and
5. Press
OFF
6. Press
(The default setting is in bold type.)
until the desired setting
.
.
How the unit operates
or
to select "ON".
.
SET
.
.
SET
.
MENU
for fax reception.
or
to select "ON".
.
SET
.
.
SET
.
MENU
Advertisement
Table of Contents
