Panasonic WJ-MPU955A User Manual page 53

You will remain in the "Add" mode, allowing you to enter information about another
switch node.
5. To exit the "Add" mode, click the red X
You will exit the "Add" mode.
6. To edit a configured switch node, highlight a frame ID and click the
Edit button
You may also double-click on a frame ID in the list to enter the edit mode.
7. Edit the desired fields
8. Click the green check mark to save and exit the edit mode, or click the red X
to cancel
9. To delete a switch node, highlight a frame ID and click the Delete
Record button
A confirmation message will appear.
10. Click No to cancel, or click Yes to delete the selected switch node
Configuration
49