Appendix A - Panasonic WJ-MPU955A User Manual

Appendix A

This appendix outlines, by category, the various fields and the valid values for those
fields in the table that appears when the Advanced Config button is selected on the GX
Device screen, and the GX Details window appears.
Choose which details you wish to view using the drop-down menu in the upper left
corner of the screen. A description for each field within each detail category follows.
Alarm Notification
A L A R M N O T I F I C A T I O N
F i e l d D a t a
Mode Description: This is a setup for NTSC or PAL, but currently only NTSC is supported.
Validation: 0 (fixed to zero for NTSC). Other reserved.
Default Setting: 0
Alarm TCP Description: Specifies whether to enable TCP for alarm notification
Validation: 0 = Disable 1 = Enable
Default Setting: 1
Alarm TCP Description: Specifies the destination for alarm notification using TCP.
Destination
Validation: 0 for WJ-MPU955A, 1 for other device. When this value is set to 1, Alarm TCP/ IP
address and Alarm TCP Port No. are effective.
Default Setting: 0
Alarm TCP/IP Description: Specifies a destination IP address for TCP alarm notification. This setting is
Address effective only when Alarm TCP Destination is 1.
Validation: Dotted decimal format IP address - 0.0.0.0 to 255.255.255.255
Default Setting: 0.0.0.0
Description: Specifies a destination IP port for TCP alarm notification. This setting is effective
Alarm TCP Port
only when Alarm TCP Destination is 1.
No.
Validation: hexadecimal numeral 0000 -FFFF
Default Setting: C900
Alarm UDP Description: Specifies whether to enable UDP for alarm notification
Validation: 0 = Disable 1 = Enable
Default Setting: 0
Alarm UDP Description: Specifies the destination for alarm notification using UDP.
Destination
Validation: 0 for WJ-MPU955A, 1 for other device. When this value is set to 1, Alarm UDP IP
address and Alarm UDP Port No. are effective.
Default Setting: 0
Alarm UDP IP Description: Specifies a destination IP address for TCP alarm notification. This setting is
address effective only when Alarm UDP Destination is 1.
Validation: Dotted decimal format IP address - 0.0.0.0 to 255.255.255.255
Default Setting: 0.0.0.0
Alarm UDP Port Description: Specifies a destination IP port for TCP alarm notification. This setting is effective
only when Alarm UDP Destination is 1.
No.
Validation: hexadecimal numeral 0000 -FFFF
Default Setting: C901
Appendix A
140