Panasonic WJ-MPU955A User Manual page 148

E N C O D E R
F i e l d D a t a
Comment Description: A string to put comment notes.
Validation: Within 16 characters.
Default Setting: (None)
Decoder
D E C O D E R
F i e l d D a t a
Device ID Description: GX device identifier is a local physical number that is uniquely identified within a
system domain. Its format is shown as below:
Validation: Device type [0x0F000 encode, 0x1F000 decoder, other reserved]
Default Setting: 0x1F000XXX
XXX is the value registered in Address[SW1] of the previous page .
Note: See MPEG2 Encoder and MPEG2 Decoder Operating Instructions.
Sub Device ID Description: GX sub device identifier is a local physical number that is uniquely identified
within the device. It also refers as a channel.
Validation: 0 - 3
Default Setting: Automatically assigned from 0 to 3.
Port Description: Specifies a local control port for the device.
Validation: decimal format, 1 - 256
Default Setting: Automatically assigned.
Note: This port number is the same as the port number of the MONITOR page, and it is necessary to
associate it.
Audio Mute Description: Specifies the audio mode for the device.
Validation: 0 = Mute ON, 1 = Mute OFF
Default Setting: 1
Video & Audio Description: Specifies the video stream classification.
Decryption
Validation: 0 = No Scramble, 1 = Scramble
Default Setting: 0
Decryption Key Description: Specifies the decryption key number. This is effective only when Video & Audio
Decryption is 1.
Validation: hexadecimal numeral, 00 -- FF
Default Setting: 0
Fade Description: Specifies the display color until the video image is displayed.
Validation: 0 = None, 1 = the color specified by "Foreground Color" is effective.
Default Setting: 90
Foreground Color Description: Specifies the display color until the video image is displayed.
Validation: decimal format, 00 - 148 – see the color code list in Appendix B on page 150.
Default Setting: 00
Appendix A
_ _ _ _ _ X X X device id (by rotary SW of an decoder front panel)
X X X X X _ _ _ device type
144