Other Functions; Making A Recording - Panasonic SA-XR70 Operating Instructions Manual

Other functions

^
POWER 8
Other Multi control function settings
Enter Multi
1
control.
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
(Multi control menus and
factory settings á page 28)
Change the
2
settings.
• To select
Turn to
INPUT SELECTOR
change.
Press to
enter.
• To cancel
MULTI CONTROL
PUSH ENTER
To finish settings
1. Press [MULTI CONTROL]
several times to select
"EXIT".
2. Press [INPUT SELECTOR].

Making a recording

^
POWER 8
Preparation: If you record to tape deck, set Second audio output to
"DISABLE" (á page 24).
1 Select the source to be recorded.
2
Begin recording.
Follow your recording unit's operating instructions.
Start the source to be recorded.
3
Follow your equipment's operating instructions.
SPEAKERS
A B BI-AMP
BI-WIRE
6.1CH DECODING
VCR 2
S-VIDEO IN VIDEO IN L AUDIO IN R
MULTI CONTROL
Dimmer
Dim the display for better viewing
in a darkened room.
Choose a level between 1 (bright)
and 3 (dim).
Sleep timer
The sleep timer can turn the unit
off after a set time.
It does not control any other
components.
The RESET function
The operation settings for the unit
will be initialized to the settings
made at the time of shipment.
However, any preset radio stations
will not be erased.
SPEAKERS
A B BI-AMP
BI-WIRE
6.1CH DECODING
VCR 2
S-VIDEO IN VIDEO IN L AUDIO IN R
INPUT SELECTOR
MULTI CONTROL INPUT SELECTOR VOLUME
PUSH ENTER
DOWN UP
PHONES
1. Select. 2. Select.
INPUT SELECTOR
DIMMER
• To cancel, select "OFF".
1. Select. 2. Select.
INPUT SELECTOR
SLEEP
90, 120 (in minutes)
• To cancel, select "OFF".
. 2. Select.
1. Select.
INPUT SELECTOR
OPTION
MULTI CONTROL INPUT SELECTOR VOLUME
PUSH ENTER
DOWN UP
PHONES
You can record to a tape deck connected to TAPE REC (OUT), a DVD
recorder/VCR connected to DVR/VCR1 OUT, or digital recording
equipment connected to DIGITAL OPTICAL OUT.
See the recording unit's operating instructions for details on how to
prepare it for recording.
When using the HDMI connections for the DVD player or DVD recorder
To record, follow the method described below.
Connect the recording equipment to this unit's DIGITAL OPTICAL OUT
terminal (ápage 10).
To record the video, connect the DVD player, DVD recorder or recording
equipment to this unit with a video connection cable (ápages 4 and 8).
• You cannot have digital output when DVD-Audio and sampling frequency
more than 48 kHz. Use an analog connection in this case (ápages 4 and 8).
Note
• With a tape deck, you can record any analog source except TAPE.
• With a DVD recorder/VCR, you can record any analog source except
TAPE and DVR/VCR1.
• With digital recording equipment, you can record any digital source
without copy protection.
• When you select DVD ANALOG 6CH mode, only sound from the front
left and right channels is recorded.
• Some sources do not allow digital recording. Connect through the
analog terminals.
INPUT SELECTOR
MULTI CONTROL
PUSH ENTER
3. Select.
INPUT SELECTOR INPUT SELECTOR
ON
LEVEL 2
OFF ON LEVEL 1, LEVEL 2,
LEVEL 3
• The brightness changes
to show the level.
• To check the setting
After setting the time,
INPUT SELECTOR
you can
remaining time using
step 2.
• To change a setting
OFF
Repeat the procedure
from the beginning.
OFF, 30, 60,
3. Select.
INPUT SELECTOR INPUT SELECTOR
YES
RESET
YES
INPUT SELECTOR
.
check the
NO
25