Remote control
Buttons not explained on this page are used only to operate other equipment.
Refer to the separate booklet, "Remote Control Operation Guide", for remote control operation details.
[^, RECEIVER]
Standby/on button.
[1, 2, 3, 4, 5, 6, 7, 8, 9, 0]
To enter radio frequencies and channels.
[DISC, DIRECT TUNING]
To enable selection of radio stations by
frequency.
[ ≧ 10, ENTER]
To enter two digit channels.
[TUNER/BAND]
To change the input mode and remote
control mode to TUNER.
For switching between FM and AM.
[e, r, w, q, ENTER,
RETURN TV VOL 4]
To operate the on screen menus.
[HELP]
Displays help messages.
Press if an error message appears.
A message offering a possible solution
scrolls across the display.
• The remote control mode button currently
selected lights when you press this.
[SUBWOOFER]
For selecting subwoofer level.
[CENTER FOCUS]
For turning on the center focus mode.
[MULTI REAR]
For turning on the multi rear surround mode.
[STEREO/2CH MIX, OFF]
For selecting STEREO or 2CH MIX mode.
To cancel surround effect.
[%PL Ⅱx]
Select MOVIE (DOLBY EX), MUSIC or
GAME when Dolby Pro Logic Ⅱx mode or
Dolby Pro Logic Ⅱ mode is on.
[DTS NEO:6]
For selecting a DTS NEO:6 mode: CINEMA
or MUSIC.
[SFC]
For selecting a SFC mode:
MUSIC or AV/MOVIE.
For your reference
• When playing video sources connected to DVR/VCR1
The picture remains on the screen even if you select TAPE, CD or
TUNER.
• When SPEAKERS B is on
If SPEAKERS B is selected, play will be 2-channel only. For multi-
channel play, press [B] to turn off "B". Then press [A] so that "A" only
comes on.
• When input is DIGITAL
The tape monitor cannot be used.
• When muting is on
Muting is canceled when the unit is turned off.
RECEIVER AV SYSTEM
DVD
TV
^
^
-ANALOG 6CH
CD
TAPE
DVD RECORDER VCR
-MONITOR
1
2
3
CH
4
5
6
VOLUME
7
8
9
DIRECT TUNING
ENTER
>
0
10
DISC
=
u/t y/i
TUNER/BAND
MUTING
g
h
q
TOP MENU
MENU
e
DIRECT
PLAY
NAVIGATOR
LIST
ENTER
w
q
DISPLAY
RETURN
r
TV VOL –
TV VOL +
HQ SOUND
DVD RECORDER
HELP
MODE
TV/VIDEO
DVD/HDD
-TEST
SUBWOOFER
-SETUP
–
+
w
q
CENTER
MULTI
FOCUS
REAR
LEVEL
EFFECT
STEREO/
DTS
PL x
2CH MIX
NEO:6
SFC
OFF
• When DVD ANALOG 6CH input is on
Speaker settings are ineffective. Change the settings on the DVD player
if necessary.
No picture will be output when a TV and this unit are connected using a
HDMI cable. Connect the TV, equipment to be used for playback and
this unit with a video cable as shown on page 4 or page 9.
• When using a graphic equalizer
Some distortion may occur, depending on the equalizer's settings.
–
[DVD
ANALOG 6CH, TV, CD,
–
TAPE
MONITOR, DVD RECORDER, VCR]
Input mode and remote control mode
buttons.
These buttons light when you press other
buttons to indicate the current remote control
mode.
–
DVD
ANALOG 6CH
When DVD mode is selected
• Press and hold:
For switching between analog 6-channel
and 2-channel DVD input.
DVD ANALOG 6CH only works when either
SPEAKERS A or BI-WIRE is on and
SPEAKERS B is off.
–
TAPE
MONITOR
• Press and hold:
For monitoring sound when recording to a
3 head cassette deck. Also used when you
have connected a graphic equalizer to the
TAPE terminals.
[1, CH, 2]
For selecting preset radio channels.
[4,3, VOLUME]
To adjust the volume.
[MUTING]
To mute the volume.
[HQ SOUND MODE]
For turning on the HQ sound mode.
[-TEST –SETUP]
To start the speaker test signal or enter the
on screen menu.
[LEVEL]
To adjust speaker level.
[EFFECT]
To adjust Dolby Pro Logic Ⅱx, Dolby Pro
Logic Ⅱ , DTS NEO:6 or SFC effects.
[w, 3, q, 4]
First select EFFECT, LEVEL or SFC, and
then press [w, 3] or [q, 4] to complete the
setting.
19