Using The Multi Control - Panasonic SA-XR70 Operating Instructions Manual

3
Step
1
B. Using the Multi control (Customizing your receiver)
• For details on the Multi control menus and factory settings, refer to page 28.
• Note the factory settings and ranges.
MULTI CONTROL
Turn on.
^
PUSH ENTER
POWER 8
SPEAKERS
A B BI-AMP
BI-WIRE
^
8 6.1CH DECODING
VCR 2
S-VIDEO IN VIDEO IN L AUDIO IN R
SPEAKERS
A B
BI-WIRE
RECEIVER AV SYSTEM
DVD TV
^ ^
-ANALOG 6CH
CD TAPE DVD RECORDER VCR
-MONITOR
1 2 3
CH
4 5 6
VOLUME
7 8 9
-/--
DIRECT TUNING
>
0 10
DISC =
u/t y/i TUNER/BAND MUTING
w h q
TOP MENU MENU
e
DIRECT PLAY
NAVIGATOR LIST
ENTER
w q
DISPLAY RETURN
r
TV VOL – TV VOL +
HQ SOUND DVD RECORDER
HELP MODE TV/AV DVD/HDD
-TEST
SUBWOOFER -SETUP – +
w q
CENTER MULTI
FOCUS REAR LEVEL EFFECT
STEREO/ DTS
PL x
2CH MIX NEO:6 SFC
OFF
-TEST
-SETUP –
w
LEVEL
Note regarding PCM FIX mode
In rare cases, the unit may have trouble
recognizing the digital signals on discs.
With the PCM signals on CDs, this may cause the
beginning of a track to be cut off. Engage the
PCM FIX mode if this occurs.
When PCM FIX mode is on, the unit cannot
process other signals. This may cause noise to
be output. Select another mode in this case.
The PCM FIX mode remains as set even if the
power is turned off
• With the PCM FIX mode is on, you cannot play
multi-channel sound. Play is fixed as 2-channel.
14
Settings
1
INPUT SELECTOR
2
MULTI CONTROL INPUT SELECTOR VOLUME
PUSH ENTER
INPUT SELECTOR
DOWN UP
PHONES
For the basic set-up
Select "SETUP 1 (BASIC SETUP)."
Then select the item to set, and
VOLUME perform the setting.
For the advanced set-up
Select "SETUP 2 (ADVANCE SETUP)."
Then select the item to set, and
perform the setting.
+
q
• To cancel settings
Press [MULTI CONTROL].
To finish settings
1. Press [MULTI CONTROL]
several times to select "EXIT".
2. Press [INPUT SELECTOR].
Enter Multi control.
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
Change the settings.
Turn to change.
Press to enter.
SETUP 1
SPEAKERS
SPEAKERS, D-INPUT,
HDMI SEL, IN MODE
SETUP 2
SPEAKERS
SPEAKERS, DISTANCE,
FILTER, HQ MODE
SPEAKERS
SUBW: Subwoofer
L: Front left
C: Center
R: Front right
S: Surround
SB: Surround back
The factory settings are:
SUBW YES
LCR S SB
D-INPUT (Digital input)
The factory settings are:
TV: OPT 1
DVR: OPT 2
DVD: COAX 1
CD: COAX 2
HDMI SEL (HDMI select)
The factory setting is DVD.
IN MODE (Input mode)
The factory settings are AUTO.
SPEAKERS
The factory settings are:
FRONT, CENTER and SURROUND:
SMALL
SUR BACK and SUB-WFR: YES
DISTANCE
The factory settings are:
FRONT and CENTER: 10 FEET
SURROUND and SUR BACK:
5 FEET
FILTER
100: 100 Hz
150: 150 Hz
200: 200 Hz
HQ MODE
The factory settings are:
DISPLAY: OFF
VIDEO: OFF