Panasonic SA-XR70 Operating Instructions Manual page 24

Audio settings
Multi control audio settings
Enter Multi
1
control.
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
(Multi control menus
factory settings á page 28)
Change the
2
settings.
• To select
Turn to
INPUT SELECTOR
change.
Press to
enter.
• To cancel
MULTI CONTROL
PUSH ENTER
To finish settings
1. Press [MULTI CONTROL]
several times to select
"EXIT".
2. Press [INPUT SELECTOR].
24
SPEAKERS
A B BI-AMP
BI-WIRE
^
POWER 8
6.1CH DECODING
VCR 2
S-VIDEO IN VIDEO IN L AUDIO IN R
MULTI CONTROL
Tone
You can adjust the level of the
bass and treble.
• The STEREO mode must be on
and input must be either analog
or 2-channel PCM signals. You
cannot adjust the tone if DVD
ANALOG 6CH is selected.
Balance
and
You can adjust the balance of the
front speakers.
Second audio output
Select the source to output from
SECOND AUDIO OUT.
DISABLE: For use as the regular
TAPE REC (OUT).
ENABLE: For use
SECOND AUDIO OUT.
When "SOURCE" is selected, the
source being played by this unit is
output.
To listen to the radio, select
SOURCE and tune to the station.
Dual program
When the input signal is Dolby
Digital and "DUAL" appears in the
display, the audio to be output is
set.
MAIN: Main audio output
SAP: Sub channel audio output
MAIN+SAP: Main and sub
channel audio output
Dynamic range
compression
Change this setting to listen to
software recorded
Digital at low volume (such as late
at night) maintaining audio clarity.
It reduces the peak level in loud
scenes without affecting the sound
field.
A/D attenuator
Turn the A/D attenuator on if
"OVERFLOW" lights
when using 2-channel analog
input or DVD ANALOG 6CH input.
VOLUME
MULTI CONTROL INPUT SELECTOR
PUSH ENTER
DOWN
1. Select.
INPUT SELECTOR
TONE
1. Select.
INPUT SELECTOR
BALANCE
1. Select.
INPUT SELECTOR
OPTION
as the
4. Select.
INPUT SELECTOR
SOURCE
SOURCE, CD, TV, DVD,
DVR/VCR1, VCR 2, TAPE
1. Select.
INPUT SELECTOR
OPTION
1. Select.
INPUT SELECTOR
with Dolby
OPTION
OFF: The software is played with the original dynamic range.
STANDARD: The level recommended by the producer of the software for
household viewing.
MAX: The maximum allowable compression (recommended for night viewing).
1. Select.
INPUT SELECTOR
frequently
OPTION
INPUT SELECTOR
MULTI CONTROL
UP PUSH ENTER
PHONES
2. Select.
INPUT SELECTOR
BASS
BASS TREBLE
2. Adjust the balance.
INPUT SELECTOR
L R
2. Select.
INPUT SELECTOR
SECOND-A
2. Select.
INPUT SELECTOR
DUAL PRG
2. Select.
INPUT SELECTOR
DR COMP
2. Select.
INPUT SELECTOR
A/D ATT
3. Adjust the level.
INPUT SELECTOR
0dB
-10 dB +10 dB
3. Select.
INPUT SELECTOR
ENABLE
DISABLE ENABLE
3. Select.
INPUT SELECTOR
MAIN
MAIN, SAP, MAIN+SAP
3. Select.
INPUT SELECTOR
OFF
OFF, STANDARD, MAX
3. Select.
INPUT SELECTOR
OFF
OFF ON