Basic Operations; To Turn The System Power Supply On And Off (Standby); To Turn Tv Power On And Off; Adjusting Volume - JVC XV-THA10 Instructions Manual

Dvd digital cinema system
Hide thumbs Also See for XV-THA10:
Table of Contents

Advertisement

Basic operations

The basic operations for this system are as follows.
To turn the system power supply
ON and OFF (standby)
From the remote controls:
Primary remote control
Press
AUDIO to turn power ON.
The STANDBY lamp goes off, and the current source name (or
station frequency) appears on the display window.
The center unit
button and
Press
AUDIO again to turn power OFF (standby).
The STANDBY lamp is lit.
On the front panel:
Press
to turn power ON.
The STANDBY lamp goes off, and the current source name (or
station frequency) appears on the display window.
button and 0 button will light up blue.
The center unit
Press
again to turn power OFF (standby).
The STANDBY lamp is lit.
Notes:
• The powered sub-woofer power supply is linked to the center unit.
The green POWER ON lamp on the powered sub woofer lights
when power is turned on, and goes off when power is turned off.
• A small amount of power is consumed in the standby mode.
Remove both AC power cords from the AC outlets to turn the
center unit and powered sub woofer off completely.
16
Secondary remote control
AUDIO
0
button will light up blue.
STANDBY lamp

To turn TV power ON and OFF

JVC TVs may be used as is with the primary and secondary remote
controls. TVs from other manufacturers require changes to the
transmittable signals before they can be used with the primary and
secondary remote controls. See page 57 for details of changing the
transmittable signals.
From the remote controls:
Primary remote control
AUDIO
TV/CATV/DBS
Press
TV/CATV/DBS (or
Press
TV/CATV/DBS (or

Adjusting volume

The volume level can be adjusted within the range of "0" (minimum)
to "80" (maximum).
From the remote controls:
Primary remote control
VOLUME + /–
On the front panel:
Press VOLUME + or –.
Press VOLUME + to increase volume.
Press VOLUME – to decrease volume.
CAUTION:
Always set the volume to the minimum before starting any source.
If the volume is set at its high level, the sudden blast of sound
energy can permanently damage your hearing and/or ruin your
speakers.
Secondary remote control
TV
TV) to turn power ON.
TV) again to turn power OFF.
Secondary remote control
VOLUME + /–
VOLUME + /–

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-a104uTh-a10Sp-pwa10Sp-xca10Sp-xsa10

Table of Contents