Basic Operations; To Turn The System Power Supply On And Off (Standby); To Turn Tv Power On And Off; Adjusting Volume [Volume] - JVC TH-A9 Instructions Manual

Basic operations

The basic operations for this system are as follows.
IMPORTANT
Check that remote control mode selector is set to the appropriate
position:
Set to "AUDIO/TV/VCR" to operate an audio system, TV, or
VCR.
Set to "CATV/DBS" to operate a CATV converter or DBS tuner.
The system will not operate normally while in CATV/DBS mode.
To turn the system power supply
ON and OFF (standby)
From the remote control:
Press AUDIO to turn power on.
The STANDBY lamp goes off, and the current source name
(DVD, AM or FM station frequency, or AUX) appears on the dis-
play window. At this time, the disc cover slides backwards and the
top buttons on the center unit appears.
Press AUDIO again to turn power off (standby).
The STANDBY lamp is lit.
The disc cover slides forward to cover the top buttons on the center
unit and the center unit turns off.
On the center unit:
STANDBY lamp
Press to turn power on.
The STANDBY lamp goes off, and the current source name
(DVD, AM or FM station frequency, or AUX) appears on the dis-
play window. At this time, the disc cover slides backwards and the
top buttons on the center unit appears.
Press again to turn power off (standby).
The STANDBY lamp is lit.
The disc cover slides forward to cover the top buttons on the center
unit and the center unit turns off.
Notes:
• The powered sub-woofer power supply is linked to the
center unit. The green POWER ON lamp on the powered
sub-woofer lights when power is turned on, and goes off
when power is turned off.
• A small amount of power is consumed in the standby
mode (center unit only). Remove AC power cord from the
AC outlet to turn the center unit off completely.
Downloaded From TheatreSystem-Manual.com Manuals
STANDBY/ON
TV/CATV/DBS AUDIO
AUDIO
VCR
AUX FM/AM DVD
TITLE SUBTITLE DECODE AUDIO
ZOOM DIGEST TIME DISPLAY
RETURN ANGLE CHOICE SOUND
CONTROL SUBWOOFER EFFECT
VCR
CENTER TEST
TV

To turn TV power ON and OFF

JVC TVs may be used as is with the remote control. TVs from oth-
er manufacturers require changes to the transmittable signals be-
fore they can be used with the remote control. See page 55 for
details of changing the transmittable signals.
From the remote control:
AUX FM/AM
TITLE SUBTITLE
ZOOM DIGEST
RETURN ANGLE
CONTROL SUBWOOFER
VCR
CENTER
TV
Press TV/CATV/DBS to turn power on.
Press TV/CATV/DBS again to turn power off.

Adjusting volume [VOLUME]

The volume level can be adjusted within the range of "0" (mini-
mum) to "80" (maximum).
Common:
From the remote control
PLAY
MODE
ENTER
THEATER
POSITION
TV VOL CHANNEL
TV/VIDEO
B.SEARCH
PLAY
/REW
DOWN TUNING
REC STOP
On the center unit
Press VOLUME + or –.
Press VOLUME + to increase volume.
Press VOLUME – to decrease volume.
CAUTION:
Always set the volume to the minimum before starting
any source.
If the volume is set at its high level, the sudden blast
of sound energy can permanently damage your hear-
ing and/or ruin your speakers.
STANDBY/ON
TV/CATV/DBS AUDIO
VCR
DVD
DECODE AUDIO
TV/CATV/DBS
TIME DISPLAY
CHOICE SOUND
EFFECT
TEST
TV/VCR
CATV/DBS
DSP
MODE
VOLUME + / –
VOLUME
MUTING
F.SEARCH
FF/
UP
PAUSE
VOLUME + / –
17 17 17 17