Table of Contents
Advertisement
VIDEO OUT SELECT
To connect speakers
Connect the satellite speakers and center speaker to the terminals on the powered sub-woofer using the speaker cords supplied.
Labels are attached to the speaker cords to indicate the speaker and terminal to which each is to be connected.
• The four satellite speakers may be used at either front or rear.
• Ensure that the left and right speakers are connected to left and right respectively, and that they are connected with the correct polarity
(+ve, –ve). The white speaker cord connects to the + terminal, and the black speaker cord connects to the – terminal.
Twist and remove the insulation
at the end of each speaker cord.
Conneceting the front speakers —————————
Connect the right speaker to the FRONT SPEAKERS RIGHT
terminal.
Connect the left speaker to the FRONT SPEAKERS LEFT terminal.
Front right speaker
Speaker cord (6 m)
(19.7 ft)
Black
This unit is compatible with the PAL and NTSC color systems. Set the VIDEO OUT SELECT on the rear
panel to match the color system of your TV in standby mode.
Make sure that the color system of DVD/Video CD/SVCD disc labeled on the package matches your TV.
Front left speaker
White
Note:
• Mixing up the polarity of the
speaker cords can reduce the
stereo effect and sound quality.
Connecting the rear and center speakers —————
Connect the right rear speaker to the REAR SPEAKERS RIGHT
terminals.
Connect the left rear speaker to the REAR SPEAKERS LEFT terminals.
Connect the center speaker to the CENTER SPEAKER terminals.
Black
Rear right speaker
Speaker cord
(15 m) (49.2 ft)
Connections
Center speaker
White
Rear left speaker
7
Advertisement
Table of Contents
