Operator Controls And Display Elements - Siemens SIMATIC ET 200AL Equipment Manual

2.2

Operator controls and display elements

The figure below shows the operator controls and display elements of the
DQ 8x24VDC/2A 8xM12 digital output module.
①
②
③
④
⑤
⑥
⑦
⑧
Figure 2-2
Digital output module DQ 8x24VDC/2A 8xM12 (6ES7142-5AF00-0BA0)
Equipment Manual, 08/2021, A5E36683723-AB
DIAG: LED display for the diagnostic status
X10 to X17: Sockets for the output signal
PWR: LED display for load voltage 2L+
X80: Connector for infeed of the supply voltage (POWER input)
X81: Socket for loop-through of the supply voltage (POWER output)
X30: Socket for ET-Connection IN
X31: Socket for ET-Connection OUT
LED displays 0 to 7 for the channel status
Operator controls and display elements
2.2 Operator controls and display elements
Product overview
11